If you want to access a blazing-fast internet on all your devices, then Netgear WiFi range extender is the best option to install. However, 90% of users have reported that after performing Netgear extender setup, when they try to log into their devices, they get welcomed by the mywifiext not working error message.
Are you also one of those who are getting the same error message? If yes, then consider yourself lucky because you’ve landed on the right post. Here, you’ll find the best tips that’ll help you in fixing mywifiext not working issue in a jiffy. Let’s take the plunge!
Fix: Mywifiext Not Working Issue
1. Check the Hardware
Let’s start with the basic troubleshooting tip, shall we? On the off chance if the hardware of your Netgear WiFi range extender is damaged, nothing can stop you from getting the mywifiext not working issue. To cope up with the issue, make sure that the hardware of your device isn’t damaged or faulty. Apart from that if the extender’s power cable has cuts from any end, get it replaced immediately. Also, make sure that your Netgear WiFi extender and router are getting enough power supply from their respective wall sockets.
2. Update Your Web Browser
One of the major reasons why users face the mywifiext not working issue is because of an outdated web browser. Yes, you read it absolutely right! Before accessing mywifiext login portal, update your web browser to the most recent version. Besides, for better performance of your internet browser, clear the cache, cookies, and browsing history as well. Additionally, to boost up your browsing speed – it is also suggested – close all the unwanted open tabs.
3. Have a Strong Internet Connection
You might know how a Netgear WiFi range extender starts behaving weird because of a slow internet connection? But, you don’t have to worry at all! To get the slow internet issue fixed:
-
Contact your ISP.
-
Ask the service provider to fix the issue for you as soon as possible and also to upgrade your data plan. Ensure that your extender and router are properly connected using an Ethernet cable.
-
For a strong and uninterrupted internet connection, it is recommended that you avoid connecting your Netgear extender and router wirelessly.
4. Perform Extender Firmware Update
Your smart device needs a regular update to function well, right? Well, same is the case with your Netgear extender. Your Netgear device needs to be updated with the latest firmware version on a regular basis. Wondering how to update Netgear extender firmware? Not anymore! The instructions highlighted below will help you in updating your Netgear device:
-
First thing first, power on your Netgear WiFi range extender and connect it to your existing router.
-
Then, switch on your PC or laptop and launch a web browser of your choice on it.
-
Once you’re done, access the Settings page of your Netgear extender using 192.168.1.250 or mywifiext local.
-
Select Administration,click the Firmware Update button, and follow the on-screen instructions.
In this manner, you’ll be able to perform Netgear extender firmware update. Are you able to fix mywifiext not working issue? No! Fret not! Apply the next troubleshooting tip.
5. Power Cycle Your Netgear Extender
In the event that the aforementioned steps seem a little tricky, then perhaps, you should try power cycling or rebooting your Netgear WiFi extender. Rebooting your Netgear device regularly will somehow help you fix many technical issues with your extender. Thus, don’t forget to give your Netgear extender a quick restart in a day or two. To execute the process, do the following:
-
Turn off your Netgear extender.
-
After a few minutes, turn the extender back on.
The Bottom Line
So, this was all about our post to fix mywifiext not working issue. Anticipating that this post helped you in fixing the issue? Please feel free to share your feedback with us. And, if you need any assistance – feel free to drop your concerns into the comments section.