If you want to change the SSID, password or make changes in the security settings, there is a need to access the Linksys Velop login page. But, a number of users across the globe don’t know the process of accessing the Linksys Velop login page in a correct manner. If you are also among those, then luckily you are on the right post. Here, we will provide you instructions to perform the Linksys Velop login process in a hassle-free way. Let’s take the plunge!

Steps to Login to Linksys Velop

Step 1: Power On Your Linksys Velop

First things first, plug your Linksys Velop into a working wall socket. Make sure that the wall plug you are using isn’t damaged and receiving continuous power supply.

Step 2: Connect Your Linksys Velop

The next step to access the Linksys Velop login page is to connect the device to your existing WiFi device. For this, you must have an Ethernet cable. Make sure that the Ethernet cable you are about to use is free from any type of cuts or damages. On the off chance if the Ethernet cable is damaged and you don’t have other one, try connecting your Velop and the existing WiFi device using a wireless source.

Step 3: Have the Velop Default IP

To access the Linksys Velop login page, you must have its default IP address. You can easily get the IP address of your device using the command prompt. Here are the steps required:

  • Hit the Windows button on your laptop or desktop.

  • Click on the Search icon.

  • Type cmd and hit the Enter key.

  • Command Prompt window will appear.

  • Type ifconfig and press Enter.

  • The default IP address of your Linksys Velop will display on the same screen.

  • Open Sticky Notes and copy paste the IP address.

Step 4: Open a Web Browser

Now, what you have to do is to have access on an up-to-date internet browser on a PC or laptop. Bear in mind that browser you are about to use must be free from the load of browsing history, junk files, etc. Also, all the unwanted open tabs must be closed.

Step 5: Login to Linksys Velop

In the address bar of the internet browser, carefully type the default Linksys Velop IP address and press the Enter key. Doing so will redirect you to the Linksys Velop login page. Now, input the Velop username and password into the given fields and click on Log In. The default credentials of your Velop can be easily be found on the manual. And, if you have changed the default login credentials at the time of Linksys Velop setup, use them instead.

You’re Done!

Kudos! You have successfully access the Linksys Velop login page. Now, you can perform the Linksys Velop setup process and change its settings as per your requirements.

Can’t Login to Linksys Velop?

In the event that the aforementioned steps doesn’t helped you to access the Linksys Velop login page, go through the fixes highlighted below:

  • Ensure that you have entered the Linksys Velop default IP address correctly without typos.

  • Be certain to enter the IP address only in the URL bar, not in the search bar.

  • Make sure that you are connected to your own WiFi only.

  • Be sure that your Velop isn’t catching signal interference from neighboring or unknown WiFi networks.

  • Place your Linksys Velop at the center-most area in your home.

  • Avoid placing the device inside a cabinet or on a lower surface.

  • Power cycle your Linksys Velop.

  • If the Linksys Velop login issue continues to persist even after following the fixes listed above, reset it once.

The Last Words

Still can’t access the Linksys Velop login page? Need not to worry! Without much delay, drop your concerns into the comments section.

Wising you a happy and lag-free surfing experience with Linksys Velop!